Products

SPECIAL QUICK DRYING HAMMER PAINT s.as-Vb

Special quick drying hammer paint is based on alkyd modified resin, pigments, aluminium paste, organic solvents and special additives. S.AS-Vb is used as protective and decorative paint for machines, equipments, goods with high quality of chemical - mechanical properties, beautiful appearance.

technical characteristic

³   Quick drying, easily use and apply.

³   The paint film is hard and good adhesion.

³   Good flexibility, impact resistance, glossiness and attractive colours.

³    Hammer tone ability are well propotioned and clear.

³   Quantity of paint for 1 m2 surface is 150 - 200g (practical paint consumption depends on the materia surface).

Method  of use

Surface preparation

³  On metal:the surface must be cleaned, dried, free grease and dust.

  • New metal  surface:  for primer should use silver paint S.AK-N1 or S.PA-N1.The film must be through dried.
  • Old metal surface: old  coating must be removed, use anticorrosive paint for primer.

³   On wooden  

  • New wooden surface: the surface must be good condition, free of scraches and indentation, clean the surface free of dust and grease, dry (humidity less than 6%)
  • Old wooden surface:  all contamination to be effectivelly removed.

³   For primer should use silver paint S.AK-N1 or S.PA-N1.

Method of painting

³    Mix well the can.

³    By spraying gun (applied spraying pressure is 2 - 4 KG/cm2).

³    Dilute by solvent DMT3 – AS; by rate:5 -10%. Do not dilute so much because the hammer tone will be disappear.

³    Painting one layer with drying film thicknees 35 – 40 mm.

 


Technical specifications (TCcs 03:2007/SP-STH)

Specifications

unit

value

1. Colour

Samples

As samples

2.  Flowing time by flow cup FC4 at  30 ± 1OC

second

55 - 60

3. Drying time on the film coating of 25-30 mm

 

 

- Touch drying

minute

20 - 30

- Hard drying (level 1)

hour

18 - 22

4. Adhesion

point

£ 3

5. Flexibility

mm

£ 1

6. Impact resistance

KG.cm

³ 30

7. Solid content

%

³ 46

8. Hammer tone ability

samples

Well proportioned and clear

9. Density

kg/l

0,80 – 0,90

  • § Paint is not still used and remained that must be keep tightly closed storage in dry and ventilated places.
  • § Should perform at ventilate place. Isolate from sources of heat.
    • § Note: Avoid skin and eye contact. Wear protection equipment, exp.: glove, gauze mask, and glasses... when paint spraying.

Other products

special quick drying aluminium paint s.pa - P1; ab

The special quick drying aluminium paint is base on the modified phenol resin, high quality synthetic resins, aluminium paste, organic solvent and ...

Continue »

ALKYD MELAMINE LACQUER VN-AM

The alkyd melamine lacquer is based on high quality alkyd resin, melamine resin, organic solvent and special additives. The lacquer is used as ...

Continue »

insulating varnish s.am-cd (Corresponding to 1154 )

Insulating paint S.AM-C§ is based on melamine resin, high quality alkyd resin, organic solvent and special additives. S.AM-C§ is insulating paint ...

Continue »

SPECIAL QUICK DRYING TOPCOAT S.PA - P1

Special quick drying topcoat S.PA - P1 is made from modified alkyd resin, pigments, special additives and organic solvent.S.PA-P1 paint is used as ...

Continue »

SPECIAL primer dried blood S.PA-N1 (equivalent Fl - 03K)

Special primer drying is made on the basis of modified alkyd resin, anticorrosive pigments, organic solvents and special additives. Son S.PA - N1 for ...

Continue »

Special quick drying anticorrosive paint S.PA-N1

Special primer drying is made on the basis of modified alkyd resin, anticorrosive pigments, organic solvents and special additives. Son S.PA - N1 for ...

Continue »

Hot News

     
    BackTop